UWL-09F Wide Angle Lens Instruction Manual 20190213
6
3.
Install the secure string on the lens:
a.
Use the larger Allen Key (2.5mm) included with the
Type B Adaptor Kit
in order
to unscrew one of the screws installed on the rear side of the lens (image #5).
Remove the screw and store it for possible future use (image #6).
b.
Place the secure loop included with the
Secure String Kit
over the empty screw
hole on the lens, so the screw hole on
the secure loop is aligned with the screw
hole on the lens. The short screw
included with the
Secure String Kit
should
be used to install the secure loop
(image #7).
c.
Use the smaller Allen Key (2.0mm)
included with the
Secure String Kit
in
order to tighten the short screw until the
secure loop is firmly positioned on the
lens (image #8 on the following page).
d.
Install the secure string by inserting it
through the secure loop, then pulling it through itself and testing it in order to
make sure it is secure (image #9 on the following page).
e.
It is recommended to attach the secure string of the lens to the housing, in order
to secure the lens. If making use of an arm in the system, secure strings can be
secured to the arm rather than to the housing.
Image #5
Image #7
Image #6
