Fantasea Line Lens Gear SEL1018, Instruction Manual

Page: 1 / 4

1
SEL1018 Lens Gear Instruction Manual 20170620
Fantasea Line
Lens Gear SEL1018
(Cat. No. 2211)
Instruction Manual
The Lens Gear SEL1018 enables using the zoom ring of the Sony
SEL1018 lens when used inside housings featuring the Fantasea FML
port system. The focus ring of the SEL1018 lens cannot be accessed
using this gear. For housings and lenses compatibility information,
please visit the Fantasea website –
www.fantasea.com
SPECIFICATIONS

Material: PLA

Dimensions (diameter x height): 83 x 37 mm / 3.27 x 1.46 inch

Weight: 30 g / 1.05 oz

Manufacturer’s warranty
IDENTIFICATION OF PARTS
ASSEMBLY INSTRUCTIONS
1. The Lens Gear SEL1018 should be installed on the Sony SEL1018 lens prior to mounting the lens on the
camera.
2. Remove the rear cap of the lens.
3. Hold the Lens Gear facing the rear side of the lens so that the gear teeth are pointed away from the lens
(Fig.1).
4. Install the Lens Gear on the lens by sliding it from the back of the lens towards its front. Push the Lens Gear
all the way in, until encountering resistance caused by the widening of the lens (Fig.2).
Lens Gear Spacer
Fig.1 Fig.2