Page 11
#00
4809484928
USE SAVE TO END
4809484928
ENTER NAME>
USE SAVE TO END
#25
480-948-4928
FANSTEL CORP
SAVE TO?
4809484928
SMITH
USE SAVE TO END
required by using the
Pause
button. Then press the
Save
button.
Note: If you need to dial an outside line access code, do NOT include the outside
line access code in the phone number you entered. The outside line access code is
dialed automatically if you entered it during the “Installation” procedures.
4. The third line of LCD displays “
ENTER NAME
” and
“
USE SAVE TO END
”, alternatively.
5. Use the keypad to input the first character of the name.
The number and letters on each telephone button are
displayed in turn.
6. When the desired character is displayed, you can enter
the next character.
7. If you have to use the same button to enter the next
character, press the
►
button to move the curser to
the next position and enter the next character.
8. If you will use a different button to enter the next
character, simply press that button. The cursor will
move to the next position automatically.
9. To insert a space, the
►
button to move the cursor to
the right.
10. To re-enter a character, press the
◄
button or the
►
button to move the curser to the character you wish
to modify.
11. After entering all characters, press the
Save
button to save this number/name in the
directory.
Using the Keypad to Enter a Name
You can program the name for directory entries and memory buttons using the telephone
keypad. When a telephone button is pressed during programming, a number or character
is displayed alternatively in the following order:
1
: ‘()1
2
: ABC2
3
: DEF3
4
: GHI4
5
: JKL5
6
: MNO6
7
: PQRS7
8
: TUV8
9
: WXYZ9
*
: *
0
: space 0
#
: #
Copying the Caller’s Number and Name to the Directory
When the number and name you wish to store in the
directory is displayed, press the
Save
button. The 3
rd
line
of the display indicates “
SAVE TO?
“.
You can save this caller’s number and name into directory
by pressing the
Directory
button.
