Bluetooth Low Energy(BLE) Module BT600 Series
Ver
1.0
June
8,
2015
Fanstel Corp. | 7466 E. Monte Cristo Ave. Scottsdale, AZ 85260 USA|Tel: 1 480.948.4928 | Fax: 1 480.948.5459 | E-mail: [email protected]|
Fanstel Corp. | 10F-10, 79 Xintai Wu Road, Xizhu, New Taipei City, Taiwan 22101| Tel: 886-2-2698-9328 | Fax: 886-2-2698-4813
Fanstel Technologies Corp. 11 Jiale Street, Ping-Dih, Long-Gang, Shen Zhen, 518117 China|Tel:86-0755-8409-0927|Fax:86-0755 -8409-0973
13
Federal Communications Commission (FCC) Statement
15.21
You are cautioned that changes or modifications not expressly approved by the part responsible for
compliance could void the user’s authority to operate the equipment.
15.105(b)
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
1) this device may not cause harmful interference, and
2) this device must accept any interference received, including interference that may cause undesired
operation of the device.
FCC RF Radiation Exposure Statement
1) This Transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
2) This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with a minimum distance of 20 centimeters between the
radiator and your body.
