Rev.17
71/119
Connection diagram of an RS485 bus:
7.3.
LED Indicators
The SIA-F front panel has three configurable LED pilot lights. The configuration by default is as
follows:
LED 1
LED ON: It is activated (Green LED blinking), if the device is switch on
LED 2
LED Alarm: It is activated (red LED fixed) if an alarm occurs
LED 3
LED Trip: It is activated (red LED fixed) if a trip occurs.
This LED will continue activated until the
reset of the LEDs is made.
Few situations can occur that involve the activation of different LEDs, this is, it can be more than
one LED activated at the same moment. It is possible to verify the correct running of the LEDs via
test menu.
Summary of Contents for SIA-F
