Rev.17
58/119
5.7.
Digital Inputs
The SIA-F has two digital inputs that can be configured by the user.
The configuration of the inputs is described in point
Programmable Logic Control & Digital
5.8.
Configurable Outputs
The SIA-F has up to 3 physical outputs (trip output, output 2 and output 3). The outputs can be
configured from the HMI or through the SICom program.
The configuration of the outputs is described in point
Programmable Logic Control & Digital
5.9.
Programmable Logic Control & Digital Outputs
Firstly, it is defined the concept of physical input, physical output and logical signal.
Physical inputs are the real inputs of the device. SIA-F device has two physical inputs (Input 1 and
Input 2). These inputs are translated to two internal binary states which later, can be assigned to
logical signal to get a specific operation.
Physical outputs are the real outputs of the Device. SIA-F has a trip output and other two digital
outputs (
Output 2 and Output 3).
SIA-F device has 3 LEDS (
LED1, LED 2 and LED 3
), which
receive the same treatment as the physical outputs, some working on output relays and others
working on LED diodes.
Summary of Contents for SIA-F
