87
MECHA C2 User’s Guide
v.02.5
© 2021 FANOTEC
○
Press the
S
button to select the preset
020 kit-lens-pano
(the power
code is shown on the display).
○
Press the
=
button to enter the number
3
(or
-
,
+
for 1 and 2).
○
Press either the
>
or
<
button to specify the direction of rotation.
As you can see, the preset is executed as usual, only we have to
specify what
is different
from the base name – the number
3
in our case.
The second preset can be, for example, a preset to shoot 3 images in each
position (
3 TRG
) or whatever you find useful for you.
Of course, instead of the number
3
used in our example, you can use a
combination of digits, as shown in the chapter on presets (see
).
Directional preset name
If a preset name ends with one of the > or < signs, then the preset will be
executed automatically when you press the
S
button, as the direction of
rotation is specified in the preset name and there is no need to use the
>
or
<
buttons to do that.
For example, the
020 kit-lens-pano
>
preset will be executed to the right when
the
S
button is pressed.
Although the directional preset names may be preferrable in some
situations, please note that:
●
Directional names cannot be used as a base name.
●
The execution of the preset can be performed in one direction only, the
one specified in the preset name.
