MECHA IR Remote Commander and Receiver
v.01
3
© 2021 FANOTEC
Introduction
Although both controllers
have their own buttons, they
cannot be used when
mounted on a high pole, such
as Fanotec Carbon Fiber Pole
Series 3 – 9.25m extended, or
even on the Travel Pole – 2.9m
extended.
In this case, remote control is
very helpful and the only
solution at the same time.
However, occasionally you
may not want to touch the
controller for some reason, or
it may be much more
comfortable to use the
remote control than the
controller or a smart device.
Use it with MECHA to rotate a
turntable, and your life will be
much easier.
IR Remote Commander and
Receiver for MECHA is a kit
specially designed by Fanotec to
work with MECHA C1 and C2
Controllers. It allows basic controls
and execution of program presets
wirelessly without touching the
camera, controller or any smart
device.
Commander
(Transmitter)
MECHA C2 Controller
MECHA C1 Controller
