Model 686CS Instruction Manual
D00312132
Revision F, October 2015
17
To program a profile, follow these instructions:
1.
Press
SET
.
2.
Select
P1
or
P2
depending on which profile needs to be programmed or press
SET
to exit.
3.
In profile editing mode, the top right corner of the display will show the step
number – S1, S2, etc. When display reads, “
SET RPM
,” press the
TIME +/-
keys to set value for the current parameter.
4.
Next, press the
SPEED +/-
keys to go to the next parameter in this step.
5.
When display reads, “
SET TIME
,” press the
TIME +/-
keys to set the time.
6.
Press the
SPEED +/-
keys to go to the next parameter.
7.
When the display reads, “
SET ACCEL
,” press the
TIME +/-
keys to set the
value.
8.
Press the
SPEED +/-
keys to go to the next step.
9.
Repeat instructions 3-8 to set values for parameters in the next step.
If any step has speed value equal to zero (0), it becomes the last
step of the profile.
When editing profiles, use the
SPEED +/-
keys to move between
steps and parameters of the step.
When editing profiles, use the
TIME +/-
keys to set the values of
the parameters in each step.
