LPLT Filter Press Instruction Manual
207128
Revision G, September 2012
10
3
Features and Specifications
This filter press is used in a static filtration test to measure fluid loss and filter cake
characteristics of drilling fluids.
The basic filter press assembly consists of the filter press unit and accessories,
listed in Section 10. See Figure 3-1.
The specifications for the LPLT Filter Press are listed in Table 3-1.
Table 3-1 Basic Filter Press Assembly Specifications
Category
Specification
Working Pressure
100 psi (690 kPa)
Filtering Area
7.1 in
2
(45.8 cm
2
)
Dimensions (Width x Depth x Height)
9 x 9 x 20 inches
22.86 x 22.86 x 50.8 centimeters
Weight
15 lb (6.8 kg)
Figure 3-1 Basic Filter Press Assembly
T-screw
Support Rod
Thumb Screw
Cell Body
Pressure Inlet
Support for graduated
cylinder
Frame
Top Cap
Base Cap