First time use, you may notice a slight emission of smoke. This is quite normal & it will
stop after a short time. The heating element is made of stainless steel & is coated with
a protection oil.
•
Attach the steel frame to the heater body with the M8 screws & adjustment
knobs.
•
Position the heater so it stands upright & is on a firm surface and at a safe
distance from wet environments and flammable objects.
• Connect the plug to the relevant power source.
• Set the thermostat control (left knob) to
MAX
& switch control (right knob) to the
hightest setting and let the heater operate on full power for 5 to 10 mintues.
•
Adjust the thermostat control (left knob) to required temperature.
•
Once the room reaches the required temperature, the heating element will
cut-out. Once the ambient temperature decreases, the heating element will cut
back in. The fan heater now starts and stops automatically and thus keeps the
room temperature constant.
•
Before switching off the heater, please turn the thermostat to
MIN
position & turn
the switch to fan position, let the appliance cool down for
five minutes
then turn
off the heater and disconnet the plug.
•
DO NOT TURN THE HEATER OFF FROM THE POWER SOURCE UNTIL COOLING THE
HEATER DOWN.
4. ASSEMBLY & OPERATING INSTRUCTIONS
3. GETTING TO KNOW YOUR HEATER - CONTINUED