Please solely use rated current of 10A socket!
When in use in combination with other electrical
appliances, the power socket or board may have
abnormal heat, resulting in a fre
3. Note in use
In order to prevent harm or damage to users and other people’s personal safety and
property, please make sure to comply with the following:
This symbol, referring to please be careful - “ to draw attention to”
This symbol, referring to do not do - “ banned”
This symbol, referring to the need to implement - “ mandatory”
Non-authorised or non-qualifed personnel are
not permitted to do repair or modifcation to
this unit!
banned
Could lead to product failure or injury
Do not use voltage expectant AC220~240V
± 10%!
banned
Could cause a fre or electric shock
This machine should be used with single-phase
two pole grounded electrical outlet and to ensure
its reliable grounding! Grounding device is not
installed, it could lead to airframe and other metal
parts with electrostatic induction.
Ensure grounding
PORTABLE EVAPORATIVE AIR COOLER
Could lead to product failure or leakage
Make sure to unplug the power plug from the
socket when cleaning the water tank and cool-
ing pads, moving the machine or when not in
use long periods.
May result in an electric shock or damage
Use 0.15~0.6MPa water pressure! Temperature
cannot exceed 45’C.
banned
May result in the cooling pad to dissolve and
plastic product deformation, damage and affect
the performance
Do not damage, destroy, over bend and twist the
power cord. Please do not place heavy objects on
the power cord. Ageing or damaged power cord
must immediately be replaced or repaired by an
authorised persons.
banned
Easily cause damaged, fre and electric shock
3.
PORTABLE EVAPORATIVE AIR COOLER
13. Cleaning & mainteance
TYPE
FREQUENCY
Changing the water
Weekly
1
Cleaning the flter screen
Monthly
1
Cleaning the cooling pads
Quarterly
1
*Please note in more dusty environments, the above schedule may need to occur on a
more frequent basis.
CLEANING THE COOLING PAD AND FILTER SCREEN
*PLEASE ENSURE THE UNIT IS TURNED OFF AND UNPLUGGED FROM THE POWER SOURCE
1. use a screwdriver to unscrew 6 screws from the air-inlet louvre as per the
image.
2. pull out the flter screen from the air-inlet louvre
3. hold the cooling pad and/or the flter screen and wash it down with a hose.
NOTE:
do not use a high pressure water hose as it may cause damage to the cooling pads
do not use detergents or soap to clean the cooling pads
10.
Take out the dustproof net upward
