4. ASSEMBLING & OPERATING INSTRUCTIONS
4. ASSEMBLING & OPERATING INSTRUCTIONS
•
Position the heater so it stands upright & is on a firm surface (ICH2P).
• Connect the plug to the relevant power source.
• Switch heater on by means of the Pull Switch
Position 0 - OFF
Position 1: 650W (lower power)
Position 2: 1300W (intermediate power)
Position 3: 2000W (fulll power)
•
DO NOT TURN THE HEATER OFF FROM THE POWER SOURCE
5. CLEANING, MAINTENANCE & STORAGE
•
Before starting any maintenance task, shut down, unplug and let the heater cool
down for at least 15 minutes.
•
Do not attempt any electrical repair yourself. If the heater needs service or repair,
contact a qualified persons.
•
When cleaning, make sure that water does not enter the unit.
• Do not open the enclosure to clean the inner parts. Do not spray water into the
heater.
•
Never use solvents, gasoline, toluene and similar aggressive chemicals to clean
the heater.
