Fanmaster ASP-500-MF3, Instruction Manual

Page: 7 / 12

4. HOW IT WORKS 6. ASSEMBLY & OPERATING INSTRUCTIONS
ASSEMBLY
There is minimal assembly required. REMOVE PLASTIC PACKAGING FROM FILTERS -
open the cover via releasing the two (2) latches and remove the plastic packaging
from all three filters. Failure to do so will cause risks or damage to the appliance. The
appliance will not work.
OPERATING INSTRUCTIONS
1. Place the appliance so that it is in an upright vertical position (placed on the
rubber feet).
2. Connect the plug to the relevant power source.
3. Open the air inlet cover on the opposite side of the control panel (filters)
4. Turn the appliance on by turning the Variable Speed Control.
5. The appliance can be operated in ther vertical or horizontal position.
6. To turn appliance off turn the Variable Speed Control anti-clockwise.
Remove the appliance from the carton. If the appliance is damaged, please
contact Fanmaster or where you purchased the appliance from.
AUXILIARY OUTLET/DAISY CHAIN
Maximum Amps: 10A
Maximum Units: Link up to 3 air scrubber purifiers
CONTROL PANEL
Variable Speed Control - controls the air flow (clockwise to increase)
Circuit Breaker Switch - protects the unit if there is more than 10amps passing through
the circuit, the unit will cut off the power.
Hour Meter - indicates the running time of the unit
UVC On/Off - controls the UV-C Lamp
Change HEPA Filter - indicates when to replace/clean the HEPA Filter