FanJu FJ3389B-NORCC, User Manual

Page: 10 / 82

FJ3389B-NORCC Manual
7.2 Current Temperature and Temperature Trend Display
►
The current indoor temperature/humidity/barometric pressure and the
temperature/humidity trend (indoors) are shown in the LCD display.
►
After successfully connecting with the outdoor sensor, the weather station
can display the outdoor temperature/humidity and the
temperature/humidity trend (outdoor)
►
You may see the following displays:
The temperature/humidity is rising.
The temperature/humidity is remaining constant.
The temperature/humidity is falling.
7.3 RF Transmission Procedure
► The weather station automatically starts receiving transmission from
outdoor sensor for outdoor temperature & humidity after batteries inserted.
► The outdoor sensor will automatically transmit temperature and humidity
signal to the Weather Station after batteries inserted.
► If Weather Station failed to receive transmission from outdoor sensor (“
-
- ”display on the LCD), press and hold
“▼” button for 3 seconds to receive
transmission manually. RF icon “ ” flashes on the LCD
，
The Weather
Station to receive the outdoor sensor.
7.4 Maximum/Minimum Temperature and Humidity
► To toggle indoor/outdoor maximum, minimum temperature and humidity
data, press the “
MEMORY ” button:
Once to show the maximum temperature and humidity values.
Twice to sow the minimum temperature and humidity values
Three times to return to the current temperature and humidity levels
► To reset the maximum and minimum temperature and humidity, press and
hold down the “
MEMORY ” button about 2 seconds. This will reset all
minimum and maximum data recorded to the current displayed values.
F.Y.I.:
►
If the temperature reading is below ranges , the LL.L will be displayed. If
the temperature reading is above ranges , the HH.H will be displayed.
7.5 Outdoor Temperature Alert Setting
► Press and hold down the “ ” button for 2 seconds until the icon for the
10