FJ3378-DCF Manual
21
Comfortable
too cold or too hot
7.6 Current Humidity and Humidity Trend Display
After you insert the batteries, the weather station measures the current relative humidity. The trend display shows a
neutral relative humidity course
. The further course of the trend display is determined as follows:
If, after an hour, the relative humidity is more than 5% higher than the value measured first, then a positive
course is displayed
.
If, after an hour, the relative humidity is more than 5% lower than the value measured first, then a negative
course is displayed
.
If the relative humidity does not change within an hour, the upward or downward pointing arrow becomes a
horizontal arrow. The measured relative humidity is then taken as the neutral value from which further prognoses are
made.
7.7 Maximum/Minimum Temperature and Humidity
To view indoor/outdoor maximum, minimum temperature and humidity data, press the “
MEM
” button:
Once to show the maximum temperature and humidity values.
Twice to sow the minimum temperature and humidity values
Three times to return to the current temperature and humidity levels
To reset the maximum and m inimum temperature and humidity, press and hold down the “
MEM
” button about 2
seconds. This will reset all minimum and maximum data recorded to the current displayed values.
F.Y.I.:
If the temperature reading is below ranges, the LL.L will be displayed. If the temperature reading is above
ranges, the HH.H will be displayed.
7.8 Remote Sensor Transmission:
The
weather station automatically starts receiving transmission from outdoor thermo sensor for outdoor temperature
& humidity after batteries inserted.
The outdoor sensor will automatically transmit temperature and humidity signal to the Weather Station after batteries
inserted.
The weather station can connect up to 3 channel wireless sensor registration, the use of multiple wireless sensor,
the wireless sensor channel cannot choose the same channel at the same time (a total of 1, 2, 3 channel can
choose)
Press the “▼” key can switch the display of different channels of remote temperature and humidity, when displaying
the symbol "
", will display the channel every 5 seconds automatically switch a channel
If Weather Station failed to receive transmission from outdoor sensor (“
- -
”display on the LCD), press and hold
“▼”
button for 3 s econds to receive transmission manually. RF icon “ ” flashes on the LCD
，
The Weather Station to
receive the outdoor sensor.
