FanJu FJ3365, User Manual, Page: 6 / 75

FJ3365-Norcc Manual
2 INITIAL OPERATION AND NOTES
2.1 Initial Operation

Open the weather station battery compartment, insert 2 x AA batteries
observing polarity [ “+” and “ –“ marks]

Remove the battery compartment on the Wireless Remote Sensor, insert
2 x AA batteries observing the correct polarity (+ and - marks) and close
the battery compartment.
 When the power is connected all the icons on the LCD display will light up
for 3 seconds, you will hear a beep tone and the weather station will start to
detect the indoor temperature and humidity

The weather station will start to make a connection to the outdoor remote
sensor. This operation takes about 3
minutes and is displayed by a flashing reception RF icon “
” in the “Remote
Sensor” display area on the receiver.
2.2 Notes for Customer before Use

If weather station failed to receive transmission from outdoor sensor (“ - -
”display on the main station LCD), press and hold “ - ” button for 3 seconds to
receive transmission manually. RF icon “ ” flashes on t he LCD and the
weather
station to re-receive the data from outdoor sensor. Or open the sensor battery
compartment, press the TX button to connect the sensor and station again.
3 TIME, TIME ZONE AND CALENDAR SETTING
3.1 Manual Time Setting

Press the “ MODE ” button, can switch the display calendar, second or alarm
time

Press and hold down the “ MODE ” button for 3 seconds, the 12/24 hour mode
display starts to flash. Now use“ + ” and
“-” buttons to set the correct 12/24 hour mode.
6