Fanimation Sandella FP1820 Series, Owner'S Manual

Page: 12 / 14

12
Before discarding packaging materials, be certain all parts have been removed
Parts List
Ref. No. Description Part #
1 Hanger Bracket Assembly APG510BL
3 Ceiling Canopy PG160
¾¾
Hardware Bag Containing:
HDWFP1830
¾¾
4 5/32 ˝ Threaded Rods (2)
5 5/32 ˝ External Lockwashers (2)
6 Knurled Knobs (2)
10 Phillips Screwdriver & Angled Screwdriver
11 Blade Holder (Side B) Screws (11)
12 Wood Blade Screws (13)
13 Wood Blade Flat Washers (13)
14 Blade Holders to Flywheel Screws (11)
15 Switch Cover Housing Screws (2)
16 Wire Connectors (3)
2 Downrod/Hanger Ball Assembly Containing:
ADR6
¾¾
8 Clevis Pin
9 Bridge Pin
7 Fan Motor Assembly Consisting of:
AMA1820
¾¾
Fan Body
Uplight Assembly
Flywheel
Fluted Housing Assembly
Switch Cup Housing
7A Cover Switch Housing AC1803
¾¾
Blade Holder Packs Containing:
19 Blade Holders - Wood (Set of 4) AP1801
¾¾
20 Cover Blade Arm (Set of 5)
AP3220
¾¾
21 Blade Holders - Traditional (Set of 5) AP1802
¾¾
22 Remote (Receiver) Module P2550
23 Remote Control C22
24 Wall Control C23
Support Cable Bag Containing:
HWBSCABLE
17 Flat Washer
18 3 ⁄
8
˝ x 2 ˝ Lag Bolt
25 Ceiling Support Cable
26 Cable Clamp
¾¾
Insert FINISH CODES (Refer to fan model number located on downrod support)
Model #FP1820**
How To Order Parts
When ordering repair parts, always
give the following information:
• Part Number
• Part Description
• Fan Model Number
Contact your retail store for repair parts.