11
How to Wire Your Ceiling Fan (Continued)
Figure 2B
Green Wire
from Supply
(Ground)
Green Wire
from Hanger
Bracket (Ground)
Green Wire
from Hanger
Ball (Ground)
White Wire
from Supply
White Wire
from Fan
Listed
Outlet Box
Household
Supply
Black Wire
from Fan
Black Wire
from Supply
Red Wire
from Supply
1.
Connect the green grounding lead from the downrod
and the green grounding lead from the hanger bracket
to the supply grounding conductor (this may be a bare
wire or wire with green colored insulation). Securely
connect wires with wire connector. Securely connect
the white fan motor wire to the white supply (neutral)
wire using wire connector. Securely connect the black
fan motor wire to the black supply wire using wire
connector. Securely enclose the red supply wire with
wire connector. (Figure 2B)
Option B - with black, white and red supply wires
WARNING
Check to see that all connections are tight, including
ground, and that no bare wire is visible at the wire
connectors except for the ground wire. Do not operate
fan until the blades are in place. Noise and motor
damage could result.
WARNING
Check to see that all connections are tight, including
ground, and that no bare wire is visible at the wire
connectors except for the ground wire. Do not operate
fan until the blades are in place. Noise and motor
damage could result.
2.
After connections have been made, taking care not
to pinch the wires and put the white and green leads
to one side and the black leads towards the other side,
the connection should be turned upward and carefully
push leads into the outlet box. The wires should be
spread apart with the grounded conductor and the
equipment-grounding conductor on one side of the
outlet box and the ungrounded conductor on the other
side. (Figure 3B)
Figure 3B
Green Wire
from Supply
(Ground)
Green Wire
from Hanger
Bracket (Ground)
Green Wire
from Hanger
Ball (Ground)
White Wire
from Supply
White Wire
from Fan
Listed
Outlet Box
Household
Supply
Black Wire
from Fan
Black Wire
from Supply
Red Wire
from Supply
2.
After connections have been made, taking care not
to pinch the wires and put the white and green leads
to one side and the black leads towards the other side,
the connection should be turned upward and carefully
push leads into the outlet box. The wires should be
spread apart with the grounded conductor and the
equipment-grounding conductor on one side of the
outlet box and the ungrounded conductor on the other
side. (Figure 3A)
Figure 3A
Green Wire
from Supply
(Ground)
Green Wire
from Hanger
Bracket (Ground)
Green Wire
from Hanger
Ball (Ground)
White Wire
from Supply
Listed
Outlet Box
White Wire
from Fan
Household
Supply
Black Wire
from Supply
Black Wire
from Fan
x 4
Wire Connectors
HARDWARE USED:
Summary of Contents for PC/DC FPD7619 Series
Page 19: ......
