background image

6

Fan Alignment And Hanger Bracket Installation (continued)

Final Fan Assembly

1.

  Make sure the electrical supply wires, including 

the hanger bracket grounding wire and safety cable 
are pulled through the extension pole, between the 
hanger bracket and the junction box so that electrical 
connections can be made later.

3.

 Hang the Crossbar / Pole Assembly (assembled 

earlier) into the the hanger bracket. Make sure the groove 
of the hanger ball is positioned on the tab of the hanger 
bracket. (Figure 2)

4.

 

Carefully ROTATE 

the

 

Hanger Bracket and Crossbar /

Pole Assembly together to orientate the fan in the desired 
position. (Figure 2)

5.

 Carefully remove the Crossbar / Pole Assembly from 

the Hanger Bracket.

NOTE:

 If the Hanger Bracket rotates prior to tightening 

the lag bolt, the fan will no longer be positioned properly.

6.

 NOW, securely and fully tighten the lag bolt in the 

center of the Hanger Bracket while being careful not to 
allow the Hanger Bracket to rotate. (Figure 3)

Tab

Rotate both Hanger 
Bracket & Crossbar/
Pole assembly 
together 

Figure 2

Figure 3

Figure 1

Floor

Ceiling

No

less than

7 ft

CAUTION

The fan must be hung with at least 7´ of clearance from 
floor to blades (Figure 1)

Summary of Contents for Palisade FP240RS

































Reviews: