1. Check to see that you have received the fol low ing
parts:
• Wall Bracket
• Standard Hardware Bag
1. 5/16
˝
-18 x 2½
˝
Bolt
2. 5/16
˝
Flat Washers (3)
3. Special Hex Bolt
4. 5/16
˝
-18 x 1½
˝
Bolt (for use with Pedestal Acc.)
• Wall Unit Hardware Bag
1. Two #12 x 3
˝
wood screws.
2. Two 5/16” plastic hole caps.
3. Two ½
˝
plastic hole caps.
NOTE:
If you are uncertain of part de scrip tion, refer to
exploded view illustration. (page 20)
NOTE:
Place the parts from the Hardware Bag in a
small container to keep them from getting lost. If any
parts are missing, contact your local retailer.
How to Assemble Your Wall Accessory
Tool Needed for Assembly
• ½
˝
Adjustable Wrench
Unpacking Instructions for the Wall Accessory
Hardware bags
Carton
Lower Inner
Packaging
Upper Inner
Packaging
Wall
Brack et
Fig. 22
12
▲
WARNING
Do not install or use fan if any part is damaged or
missing. This product is designed to use only
those parts supplied with this product and/or any
accessories designated specifically for use with
this product by Fanimation. Substitution of parts
or accessories not designated for use with this
product by Fanimation could result in personal injury
or property damage. Contact your retail store for
missing or damaged parts.
