Fanimation KLEAR FPD6858 Series, Manual, Page: 4 / 68

NOTE: Place the parts from the loose parts bags in a small
container to keep them from being lost. If any parts are
missing, contact your local retailer.
Tools Needed for Assembly
(Not Included)
WARNING
Before assembling your ceiling fan, refer to section on
proper method of wiring your fan (page 11). If you feel you
do not have enough wiring knowledge or experience, have
your fan installed by a licensed electrician.
This manual is designed to make it as easy as possible for you to assemble,
install, operate and maintain your ceiling fan
• One Phillips head screwdriver
• One ¼˝ blade screwdriver
• One stepladder
• One wire stripper
Materials
Wiring outlet box and box connectors must be of type
required by local code. The minimum wire would be a 3-
conductor (2-wire with ground) of the following size:
nstalled ire ength ire i e
p to ft
ft
Unpacking Instructions
1. Check to see that you have received the following parts:
NOTE: If you are uncertain of part description, refer to exploded view illustration.
WARNING
Do not install or use fan if any part is damaged or missing. This product is designed to use only those parts supplied with
this product and/or any accessories designated specifically for use with this product by Fanimation. Substitution of parts
or accessories not designated for use with this product by Fanimation could result in personal injury or property damage.
Contact your retail store for missing or damaged parts.
For your convenience, check-off each step. As each step is completed, place a check mark. This will ensure that all steps have been
completed and will be helpful in finding your place should you be interrupted.
4
Hanger Bracket
Assembly (1)
Ceiling Canopy (1)
Blade Plate (1)
Blade Set (1)
Downrod/Hanger Ball
Assembly (1)
– Downrod (1)
– Hanger Ball (1)
– Clevis Pin (1)
– Hairpin Clip (1)
– Set Screw (1)
– Pin (1)
Motor Coupling
Cover Assembly (1)
Canopy Screw
Cover Assembly (1)
Receiver (1)
Wire Connectors (5 extra)
Hand-held Remote (1)
Wall Plate (1)
Screws (2)
Batteries (2)
Hardware Bags
3/16˝-24 Truss Head Screw with
Spring Washer/Flat Washer (13)
Wire Connectors (4)
Steel Cap Assembly (1)
Motor Assembly (1)
Light Kit Wire Cover (1)
Light Kit/Glass
Assembly (1)
Switch Housing
Assembly (1)
LED Assembly (1)
Extension Wire Lead Kit (1)
(for use with optional longer downrods—sold separately)