How to Install Your Switch Cover Assembly
13
1.
Disassemble switch cover assembly from switch
housing removing four screws. Retain these screws
for Step 4. (Figure 1)
3.
Securely attach 3-pin connector and 2-pin connector
from motor assembly to wiring harness socket within
switch cover assembly. (Figure 3)
4.
Assemble the switch cover assembly onto the
switch housing using the previously removed
screws and securely tighten all screws. (Figure 4)
2.
Remove one of the three screws in the support
bracket of motor. Slightly loosen the remaining two
screws. Assemble the switch housing to the support
bracket using the two key slots in the switch housing.
Replace the third screw and securely tighten all three
screws. (Figure 2)
Figure 3
Figure 2
Switch Housing
Switch Housing
Switch Housing
Switch Cover Assembly
Switch Cover
Assembly
Figure 4
Motor
Assembly
Figure 1
Switch Cover
Assembly
Summary of Contents for FPD7617 Series
Page 19: ......
