![Fanimation Enigma FP2120RB Specification Sheet Download Page 2](http://html.mh-extra.com/html/fanimation/enigma-fp2120rb/enigma-fp2120rb_specification-sheet_542270002.webp)
A
7´ min
Floor
Ceiling
Blade Sweep
60
˝
Net Hanging Weight: 29 lbs
6½
˝
dia
18° Blade Pitch
10
˝
Copyright 2008 Fanimation, Inc.
2008/04
The Enigma
®
Fan Assembly – FP2120RB
10983 Bennett Parkway
Zionsville, IN 46077
Toll Free (888) 567-2055
FAX (866) 482-5215
Outside U.S. call (317) 733-4113
Visit Our Website www.fanimation.com
Limited Edition Finish
RB
Red-Blue
Dimensions shown in inches
*
Minimum Pole Lengths for Sloped Ceilings
Degrees / Pitch
Minimum Pole
Length
Blade Tip to
Ceiling Dimension
18° / 4 - 12 pitch
12
˝
(DR1-12_)
6½
˝
27°- 30° /
6 - 12 to 7 - 12
18
˝
(DR1-18_)
4½
˝
Distance from Ceiling
to Bottom of Fan
A
Fan w/6
˝
downrod
18½
˝
Fan w/12
˝
downrod
24½
˝
Fan w/18
˝
downrod
30½
˝
Fan w/24
˝
downrod
36½
˝
Fan w/36
˝
downrod
48½
˝
Fan w/48
˝
downrod
60½
˝
Fan w/60
˝
downrod
72½
˝
Fan w/72
˝
downrod
84½
˝
INSTALLATION REQUIREMENTS:
Ceiling fan is to be secured to a structural member such as a ceiling joist and must be capable of withstanding a load of
at least 50 pounds. A lag bolt must pass through the junction box and into the wood member above.
ELECTRICAL REQUIREMENTS:
Ceiling fan requires a grounded electrical supply line of 120 volts AC, 60 Hz, 15 amp circuit. 220 VAC, 50 Hz version is
available.
FAN SPEEDS:
3-speed, non-reversing. High - 180 rpm; Med - 120 rpm; Low - 60 rpm
CONTROL OPTIONS:
The hand-held remote control (C4T) and canopy-style receiver (RECAN34) are included. This is a push-button control
with frequency code settings located on both the transmitter and the receiver units. Each push button unit will consist of
3 separate speeds, down light controls, and off button. Optional controls are: C1 or C2 wall controls; C25 wall control (to
be used in conjunction with fan receiver). Installation and operating instructions provided with each control.
LIGHTING OPTION:
Single, built-in downlight socket, bulb not included, use only PAR 30 short-neck Halogen Bulb with a maximum of 75
watts.
DOWNROD OPTIONS:
The Enigma
®
fan comes with a 1
˝
Dia. x 6
˝
(DR1-6) downrod. Optional downrods are available in 12
˝
, 18
˝
, 24
˝
, 36
˝
, 48
˝
,
60
˝
, and 72
˝
. The Enigma
®
fan can be mounted on a sloped ceiling up to
*
30°. Most sloped ceiling installations require
a downrod longer than the standard 6
˝
downrod. Optional sloped ceiling ball kits (SCB1-52) are available for up to 52°.
Call tech support for more information
DAMP LOCATION:
Fan is rated for Damp Location usage.