BTCR9U Remote Control
SPECIFICATION and INSTRUCTION SHEET
IMPORTANT: FOR PULL CHAIN FANS YOU MUST SET CEILING FAN TO HIGH SPEED AND LIGHT KIT (IF ANY)
TO ON BEFORE OPERATING REMOTE CONTROL.
1. Read and save these instructions.
2. Please note that all fixed wiring appliances should be installed by a qualified electrician.
3. The supply to the remote control receiver should be connected through a main switch, i.e. existing wall switch.
4. Disconnect from power supply at wall switch before working on remote control receiver or ceiling fan.
5. Install receiver into the ceiling fan canopy of the fan to ensure proper protection.
6. This unit is to be used for the control of ceiling fans connected to an AC120V 60Hz power supply only.
7. Do not install in damp locations or immerse in water (For indoor use only).
8. Do not pull on or cut/shorten receiver leads.
9. Do not drop or subject the unit to any form of impact.
To assure continued FCC compliance
FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE STATEMENT
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15
of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one or more of the following measures: --Reorient or
relocate the receiving antenna. --Increase the separation between the equipment and receiver. --Connect the
equipment into an outlet on a circuit different from that to which the receiver is connected. --Consult the dealer or
an experienced radio/TV technician for help.
CAUTION:
To assure continued FCC compliance:
Any changes or modifications not expressly approved by the grantee of this device could void the user's authority to
operate the equipment.
FCC ID: KUJCE10302
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
DESCRIPTION:
fanLink Bluetooth receiver and transmitter. Transmitter features 3 Speeds,
Uplight and Downlight controls. Fan/light off timer function available through
fanLink app on your smart devices.
FAN COMPATIBILITY:
visit
www.fanimation.com/fanSync
PLEASE NOTE:
The battery will weaken with age and should be replaced before leaking takes place as this will
damage the transmitter. Dispose of used battery properly and keep the battery out of reach of children.
CAUTION:
To reduce the risk of fire or injury, do not use this product in conjunction with any variable
(rheostat) wall control.
