9
Mounting the Fan Blades
Standard Reversible Wooden Blades
1.
Mount the wooden blades on the blade holder with
three screws and three fiber washers. (Figure 1)
2.
Then mount the assembled blade/blade holder onto
the flywheel, secure with flywheel screws.
(Figure 2)
NOTE:
Various optional blades are available for this
assembly (see below). See Catalog or visit our website,
www.fanimation.com for more information.
Figure 1
Figure 2
Blade / Blade Holder Options
FP1018
Reversible Oak / Walnut Wood Blade
(sold separately)
Traditional Blade Holder
for use with ISD, ISP, or ISW series Blades
(sold separately)
BH20 Series Wood Blade Holder -
uses B4000 Series Wood Blade only
(sold separately)
CAUTION
Do not connect fan blades until the fan is completely
installed. Hanging fan with blades connected may result
in damage to the fan blades.
