11
1.
Assemble the blades and support plates to the
blade supports of motor assembly using the M16 x 25
mm socket head cap screws with the allen wrench.
(Figure 20)
How to Assemble the Blades and Light Kit Assembly
Figure 20
Support Plate
Blade
Blade support
Figure 21
Light Plate Assembly
Light Plate
Assembly
M16x25 mm
Socket Head Cap Screws
Motor
Assembly
Socket Plate Assembly
Figure 23
2.
Remove the three screws in the motor assembly.
Assemble the light plate assembly to the motor
assembly using the previously screws and securely
tighten all three screws. (Figure 21)
3.
Connect the 2 single-pin connectors from the motor
assembly to the 2 single-pin connectors from the socket
plate assembly. (Figure 22)
Socket Plate
Assembly
4.
Remove one of the three screws in the light
plate assembly. Slightly loosen the remaining two
screws. Assemble the socket plate assembly to the
light plate assembly using the two key slots.
Replace the third screw and securely tighten all three
screws. (Figure 23)
Do not connect fan blades until the fan is completely
installed. Installing the fan with blades assembled
may result in damage to the fan blades.
CAUTION
To reduce the risk of electric shock, disconnect the
electrical supply circult to the fan before installing
light kit.
CAUTION
x 6
x 1
ALLEN WRENCH
M16 X 25 mm
SOCKET HEAD
CAP SCREW
HARDWARE USED:
Figure 22
Motor
Assembly