GPS / GSM / GPRS TRACKER
Set IP and Port
The IP is the address of your network, and the Port is related to certain computer. After you
set this,all data from the tracker will be sent to this address. That means there will be now
SMS geo-info any more. You can say, IP has more priority then authorized number.
Send SMS command "
pspace+ip space+port content
" to set
the IP and Port, for example "adminip 211.154.139.227 9001".
(For ARM7 solution, tracker can also accept GPRS commands, the format of the commands
via GPRS are the same as SMS commands mentioned above.)
6. HOME MONITORING
6.1 ASSEMBLE THE HOST
Fix a screw
in
the wall and
hang the
host on it.
HOST
MEGNET
Fix the
magnet to the
wall with a
screw.
6.2 SET THE HOME MONITORING
First insert the battery to the host and connect the host to the power supply. The
indicator of the host will light which means working normally.
Send SMS command "
opassword
" to enable the home minitoring. You will receive
reply as "openhome ok!" if the setting is successful.
Then if you call the tracker, it will give you indication as power off. When the tracker leave
away the host for 20~30 meters, the tracker's display will flash blue light, meantime the
tracker will
(BACK TO TOP)
10
