The FT-1 REAR PANEL
This is a fused, power receptacle allowing the user to disconnect the ISE type power cord as necessary. The removable fuse housing contains
the 0.5A system fuse. There is also a compartment to hold a spare fuse.
AC POWER INLET
These are XLR-type connections providing balanced, line level, audio output. Nominal output impedance is 47.5 ohms. (0dB into 600 ohms).
Connections: 1. GND; 2. (-); 3. (+)
BALANCED OUTPUTS
These are unbalanced (RCA-type) connections providing line level audio output. Nominal output impedance is 47.5 ohms
" " - HI
These are unbalanced (RCA-type) connections providing an unamplified, low impedance, audio signal direct from the tuner's multiplex filters.
AUDIO OUTPUTS -LO
Accepts a BNC-type connector. This output is primarily for use in an FM broadcast station. The Composite output from the FT-1 is adjustable from
2.5 - 4.5V(peak to peak) which is sufficient to drive most modulation monitors or FM exciters.
COMPOSITE OUTPUT
Accepts a standard F-type antenna coaxial cable connector.
ANTENNA IN (75 ohm)
DESCRIPTION
CABLE DETAIL
*
CONNECTION
THE REAR PANEL CONNECTIONS
* Record the cable type and length in the event you have to replace it some time in the future
.
5.
1 2
3
1 2
3
