29
charged. Let charge (for a full charge) for about 8 hours. Then disconnect
the USB cable. Your device is ready to use.
When the battery is running out of power, the charge indicator flashes
again. Then recharge the device.
The device may heat up slightly during charging. Do not use the device
while charging, turn off the device.
6. OPERATING INSTRUCTIONS
Before using your appliance, carefully read the safety instructions in
this manual.
First insert a 3V battery (CR 2032) into the remote control, respecting the
polarity (by turning the cover on the back of the remote control). Using the
control panel or remote control :
Power ON/OFF
Press the button to turn the fan on or off. The appliance starts at low
speed, the low speed light comes on.
Speed
Press the button to adjust the speed. 3 different natural wind
(random speed variation). Each time the button is pressed, the speed
increases by one level. The light corresponding to the selected speed
comes on.
Timer
When the appliance is in operation, you can set the timer by pressing the
button so that the appliance switches off automatically once the
selected time has been reached. 4 possible settings: 30 minutes, 1h, 2h,
3h. Each time the button is pressed, the timer increases by one level.
The selected time is displayed and the fan will automatically turn off when
the time is reached. To deactivate the timer, press the button until all
timer indicators turn off or manually turn off the fan.
Summary of Contents for WT-F44
Page 32: ...32 www fanelite com...
