Fanelite KF-2688, Operating Manual

Page: 15 / 18

15
Horizontal oscillation only (left / right)
Vertical oscillation only (up / down)
Horizontal and vertical oscillation
Timer
When the fan is in operation, you can set the timer by pressing the Timer button of the
control panel (or Timer OFF button of the remote control) so that the fan turns off
automatically after the selected time has been reached. 12 possible settings, from 1 hour to
12 hours. Each time the button is pressed the timer increases by one hour. The
corresponding time is displayed on the screen.
When the fan is not in use (in standby state), you can set the timer by pressing the
Timer
button of the control panel (or Timer ON button of the remote control) so that the fan turns on
automatically after the selected time has been reached. 12 possible settings, from 1 hour to
12 hours. Each time the button is pressed the timer increases by one hour. The
corresponding time is displayed on the screen.
Ventilation modes
This fan has 2 modes of ventilation : normal or eco. The fan operates in normal mode by
default. To activate or deactivate the eco mode, press the
Eco button.
Normal mode : The fan operates normally according to the selected speed.
Eco mode : When the eco mode is selected, the speed adjustment buttons are no longer
operational. The speed automatically adjusts according to the room temperature and the
temperature is displayed on the screen :
≤ 23°C : speed 2
23°C ~ 25°C : speed 4
25°C ~ 27°C : speed 6
27°C ~ 29°C : speed 8
29°C ~ 31°C : speed 9
31°C ~ 33°C : speed 10
≥ 33°C : speed 12
Light ON / OFF
Only available on the remote control. This function can be used to switch off the light of the
screen.
Mute mode
Only available on the remote control. This function is used to deactivate the beep sound of
the unit.
Notes
The remote control has a magnet and can be attached to the upper right side of the control
panel.
The fan has a memory function that records the last speed. When you turn on your fan again,
it automatically restarts at the operating speed before shutdown. If you disconnect the plug
from the mains or after a power failure, the memory function resets.
The room temperature is displayed on the screen when the fan is in standby mode (AC outlet
plugged in but fan off) or when eco mode is activated.