Standard Package contains:
-3-
A
Photography lights will be installed in the camera or
photographic camera lights before removed, is required to set
the power switch in OFF.
Parts diagram
1. Dimming switch
2. Mains switch on/off
3. Battery lock
4. Hot shoes fastening
intortum
5. Barn door
6. Soft-film
7. Amber film
Photography lights installed
1. Rotating photographic lights, make
it with the consistent direction of the
camera lens
2. Photography lights interface will be
inserted into the interface of the
camera concave-shaped
3. Clockwise rotating locking until
locked in place
Photographic lights removed
The opposite direction along the arrow anti-clockwise rotating locking to Release it
The opposite direction along pull out the photographic light, removed it
The use for photographic light
1. To following the picture to install the battery, when heard a weak "pyridaben
carbazole" sound the installation is completed.
2. When need to replace the battery push the battery lock in accordance with the
arrow direction to promote the battery can be unloaded.
3. When you turn on the photographic light please set the power switch to "ON"
4. When you turn off the photographic light please set the photographic light to "OFF
5. To following the picture to push dimmable it will be adjust the illumination scope
6. According to filming luminous efficiency need to select color temperature, Without
the filter Color temperature is 5600K for daylight. Use the Amber film the luminous
efficiency color temperature is 3000K.
7. Want Soft, you can use the equipment soft-film. soft-film can also working with the
Amber film in the same time.
1. R-3 LED lamp holder one Piece (Including Amber film 3000K one piece, Soft-film
one piece,barn door two piece).
2. NP-F550 battery one piece.
3. NP-F550 battery charger one piece.
4. 1/4 double-spigot screw adapter one piece
5. Instruction manual.
Design and specifications subject to change without notice.
%
3
1