1.POWER KEY
Press to turn unit "ON" or "OFF".
2. FUNCTION
Press this key to select refrigeration, heat or dehumidification.
or
cooling
.
3. TEMPERATURE REGULATION KEY (UP)
During cooling function
：
This key raises the preset temperature by 1
℃
each time it is
pressed to a maximum of 30
℃。
During heating function
：
This key raises the preset temperature by 1
℃
each time it is
pressed to a maximum of 25
℃
4. TEMPERATURE REGULATION KEY (DOWN)
During cooling function
：
This key lowers the preset temperature by 1
℃
each time it is
pressed to a minimum of 17
℃
.
During heating function
：
This key lowers the preset temperature by 1
℃
each time it is
pressed to a minimum of 15
℃
.
5. L.E.D. DISPLAY
Indicates the temperature or the time setting. After any time set the display will return to the
preset temperature automatically.
6. SPEED
Press to select either LOW, MEDIUM, HIGH or AUTO fan speed.
If "AUTO" is selected(During cooling function),”HIGH” or "MEDIUM" or
“LOW" will be selected automatically according to the difference between
setting temperature and room temperature.
Note: In heating function and dehumidifying function, the wind-speed setting is inefficacy because
the unit has setted high-speed(heating) and low-speed(dehumidifying).
7. PROGRAMMABLE
TIMER
Programmable timer ON/OFF key.
TIMER-ON: The timer-on is used to turn on the unit automatically after the set time is over.
1. Press the "TIMER" key at stand-by status to set the time desired.
2. Once the set hour has come to an end, the unit will turn on automatically.
3. Press the "POWER" key before time out, the setting time will be canceled and the unit will
turn on.
TIMER-OFF: The timer-off is used to turn off the unit automatically after the setting time is
over.
1). Press the "TIMER" key at stand-by status to set the time desired.
2). Once the set hour has come to an end, the unit will turn off automatically.
3). Press the "POWER" key before the time out, the setting time will be canceled and the
unit will turn off.
8.SLEEP CONTROL
FUNCTION
When setting the "sleep comfort" mode please ensure that you then set the number of
hours required and press the timer button till those hours are indicated on the L.E.D
display. After setting the hours the L.E.D. display will automatically return to the current
pre-set temperature. To increase this setting "up" press button indicating and for each
press, the temperature will be increased by 2
℃
. Likewise to set for a lower temperature
press button indicating and for each press the temperature will be decreased by 2
℃
During the course of this cycle, to ensure maximum sleep comfort. the micro-processor
memory will raise the pre-set temperature 1
℃
each half hour to a maximum of 4
℃
over
two hours and then maintain that temperature for the balance of the time set.
The portable air conditioner is fitted with a 3 minute compressor delay protection circuit
which simply means that the compressor requires 3.5 minutes to start. From either being
switched on, or when changing from “dehumidify” to any air conditioning cycle chosen.