INSTALLATION
Accessories included in the package for installation
Mounting Method A
1. Put the mounting sleeve
(1) into the dashboard.
2. Band the tabs of the
mounting sleeve (1)
outward into the
dashboard for a secure
mounting.
3. If necessary, use the strap (6) to secure the back of the unit in
place.The strap (6) can be bent by band to the desired angle.
To remove the unit,
insert the release keys
(2) on both sides of
the unit and then pull
the unit out from the
dashboard.
Mounting Method B
This mounting method is used for most Japanese cars. The actual mounting method should depend on
the type of cars and the supplied parts.
Note:
- Store small articles in places not accessible to children
- Install only with the supplied screws
- Installation varies on type of cars and supplied parts.
You should have the unit installed by qualified technician
MODE SELECTION
During unit operation, press
MOD (1)
repeatedly to select the Bluetooth operation mode.
MICROPHONE
During installation of unit, connect the microphone to the microphone jack at the back of the main unit.
LINK UP WITH MOBILE PHONE
To link up the Bluetooth connection with the mobile phone, take your phone and follow these
steps:
-turn on the Bluetooth operation of your mobile phone
-start to search new device on your mobile phone
-after searched, new device “CAR KIT” searched out, confirm the search
-input the default code “0000” in your mobile phone and confirm the setting
-“BT ON” will appear shortly on
LCD DISPLAY(4)
when the linked-up succeed
CONNECT / DISCONNECT WITH MOBILE PHONE
When Bluetooth has been connected with mobile phone, once a call is received or dial, the unit will be
responded automatically and switched to Bluetooth operation. The unit will be resumed to its original mode
when the phone hanged-up.
CALL PICK UP
When a call is received, the caller ID (if available on the incoming call) will be appeared on the
LCD
DISPLAY(4)
. Press
(11)
to pick up the call.
DIAL OUT
When a phone number is dial out, "CALLING" will be appeared on
LCD DISPLAY(4)
.
HANG UP / REFUSE CALL
Press (1) to hang up or refuse an incoming call. The unit will resume to its original playing mode.
MUSIC PLAYBACK
At Bluetooth operation mode and when mobile phone is connected, music playback from the mobile phone
will be transmitted to the unit for broadcasting.
NOTE
Bluetooth operation on the main unit is confined to call pick up, call hang up, refuse call and music
playback only.
MAIN UNIT – BLUETOOTH OPERATION
9
2
