3) Time display and setting
1) Time display
By unit - Rotate the rotary knob until the time shows on the display.
By remote control - Time will be displayed after slightly press the CLK button.
2) Time setting
By unit - After the time is shown on the display, press the rotary knob slightly, then the time
will be blinking on the display, rotate the rotary knob to set the hour; wait for 3 seconds, it
will switch to set the minute, then again rotate the rotary knob to set the minute.
After 3 seconds, the display will be back to it previous mode.
By remote - Press the CLK button, time on the display will be blinking.
Then slightly rotate the rotary knob or press VOL-/VOL+ on the remote control to set the hour,
Then wait for 3 seconds, and again rotate the rotary knob or press VOL-/VOL+ on the remote
control to set the minute.
4. Audio mode selector
1) Rotate audio mod
ID3 Tag (Factory Default)
1. If the MP3/WMA is available with ID3 TAG, the following ID3 information
will be displayed on the LCD display automatically.
2. During MP3 or WMA playback, press AMS/S button to turn on track search
mode, press 1-6 button to select the desired track.
3. For example, you are now playing the first track and you want to listen the
track 56.
3
Press AMS/S button and press number button “5” & “6”, then press “VOL”
in order to swift to track 56.
e stored station.
RDS Function
1) AF Function
The factory default is AF function on, Hold the rotary knob or press AF shortly to turn it on/off.
2) Adjusting the frequency
Press ( / ) to adjust the current frequency manually.
Press and hold / , stations will be searched automatically.
It will stop searching after the strongest stations have been tuned.
When the seeked channel does not contain RDS signal, AF icon twinkles.
When it contains RDS signal, the icon's lights of AF and PS will be on.
Meanwhile, the present station name will be displayed.
When the seeked channel is traffic broadcast program, TP icon will be on.
