F&S armStoneA5, Hardware Documentation, Page: 11 / 23

7
4.5
LVDS port connector
The single channel LVDS display port can be direct connected to a LVDS 18 bit display.
The VLCD voltage is 3.3V and switched on the baseboard. The current limit is 1.2 A.
Connector is a JAE FI-S25P-HFE. Matching connector on display cable is a crimp connector
FI-S25S housing and a cable with FI-C3-A1-15000 crimp contacts.
This connector is used because a wide range of displays does have a JAE FI-S series con-
nector (with different pinouts) and it's easy to handle identical crimp contacts for the cable
manufacturer.
LCD connector pinout
Pin Function
1,2,23,24 VLCD (3.3V switched)
3,4,7,10,13,16,19..22 GND
14 LVDS_CLK-
15 L
5 LVDS_DATA0-
6 LVD
8 LVDS_DATA1-
9 LVD
11 LVDS_DATA2-
12 LVD
17 n.c.
18 n.c.
24 BL ON signal (3.3V high active )
25 BL PWM signal (3.3V level)
Pin 1 is marked on the connector with an arrow and also marked on PCB.
The single channel LVDS port can be direct connected to a LVDS 18 bit display.
Unused signals should be left unconnected.