F&P Evora, Use And Care Manual

Page: 4 / 26

FITTING YOUR MASK
Remove all packaging before using your mask. Refer to the mask
diagram on the inside cover to identify the mask parts.
1. Connect the Top Strap
(D)
button to the
middle position.
2. Hold the front of the mask and pull the Back
Strap
(E)
over the back of the head. Pull
the mask down to position the Cushion (A)
under your nose.
3. Adjust Back Strap (E) to tighten or loosen
the Cushion (A) against your face by pulling
evenly on the tabs.
4. Adjust the Top Strap (D) button to tighten or
loosen the Headgear
(C)
so that it is sitting
just above your ear without touching it. You
may need to take the mask off to do this.
The Top Strap
(D)
should sit just forward of
the middle of your head.
5. Connect the Swivel (H) to the CPAP hose and with the CPAP on,
readjust the Back Strap (E) until the mask seals and the Cushion (A)
feels comfortable under your nose.
2 ENGLISH