- 11 -
E210417
»
Please read the instructions carefully before installation.
»
The device should be installed and operated by qualified per-
sonnel who are familiar with its design, operation, and asso-
ciated risks.
»
Do not install a meter that is damaged or incomplete.
»
The user is responsible for proper grounding of the system,
proper selection, installation, and efficiency of other devices
connected to the meter, including safety devices such as over-
current, residual current and overvoltage circuit breakers.
»
Before connecting the power supply, make sure that all cables
are connected correctly.
»
It is essential to observe the operating conditions of the meter
(supply voltage, humidity, temperature).
»
To avoid electric shock or damage to the meter, turn off the
power supply whenever the connection is changed.
»
Do not make any changes to the unit yourself. Doing so can re-
sult in damage to or improper operation of the device, which
in turn can pose a threat to people operating it. In such cases,
the manufacturer is not responsible for the resulting events
and may refuse the provided warranty in the event of a com-
plaint.
»
Do not tighten the terminals without the wire inserted. This
may damage the lift mechanism of the terminal or the plastic
cover of this terminal.
General work safety conditions
Summary of Contents for LE-01MW
Page 5: ... 5 Front panel ...
Page 12: ......
