F&F FW-RC4-AC v2 Manual Download Page 5

- 5 -

Bu� on confi gura� on

Mode

Input

A

S1

S2

S3

S4

B

BIS

BIS

S3

S4

C

BIS

BIS

BIS

BIS

D

ON

OFF

S3

S4

The functions performed by the inputs depend on the type of buttons connected and 

the type of receiver to be controlled. 

Buttons can be connected to the transmitter:

monostable (momentary) enabling the realisation of S1, S2, S3, S4, ON and OFF 

modes.

bistable (2-position) enabling the realisation of the BIS mode.

Function S1, S2, S3, S4

Briefly pressing the monostable button will:

switching on/off the relay receiver (*),

raise/lower the roller shutter (*), 

switching on/off the light in the light dimmers.

A long press on the monostable button will:

raise/lower the roller shutter for the time the button is pressed, 

decrease/increase the brightness level in the lighting dimmers.

ON function

A short press on the monostable button will:

switching on the relay receiver (*),

raising the roller shutter on roller shutter controllers (*),

switching on the light in lighting dimmers.

The ON mode can be used to force a group of receivers to be switched on simultaneously.

(*) In the case of multifunction receivers, the action of the button may additionally depend on the selected 

programme of operation of the receiver.

Summary of Contents for FW-RC4-AC v2









Reviews: