F&F EPP-618, Manual

Page: 7 / 12

- 7 -
1. Press and hold the
+
button for approximately 5 s.
2. The display will show the currently set operating function; fac-
tory default is �� .
3. If the function is not changed, confirm with the ���� button.
4. If the function is to be changed, use the + or – buttons to set
the given function and confirm it with the
����
button.
5. Then, depending on which function has been selected, set the
value of Hi or Lo current, and each confirming the value with
the ���� button.
6. Next, set the the t
ON
and t
OFF
values, also confirming each set-
ting with the
����
button.
7. After saving the last value the relay will automatically exit the
function setting mode.
Programming the operating function