F&F Filipowski sp. j.
Konstantynowska 79/81 95-200 Pabianice
phone/fax: (+48 42) 215 23 83 / 227 09 71 POLAND
http://www.fif.com.pl e-mail: [email protected]
MICROWAVE MOTION DETECTOR
Do not dispose of this device to a garbage bin with other unsorted waste!
In accordance with the Waste Electrical and Electronic Equipment Act
any household electro-waste can be turned in free of charge and in any
quantity to a collection point established for this purpose, as well as to the
store in the event of purchasing new equipment (as per the old for new rule,
regardless of brand). Electro-waste thrown in the garbage bin or abandoned
in the
bosom of nature pose a threat to the environment and human health.
DRM-02
WARRANTY.
The F&F products are
covered by a warranty of the 24 months
from the date of purchase. Effective only
with proof of purchase. Contact your
dealeror directly with us. More
information how to make a compliant can
be found on the website:
www.fif.com.pl/reklamacje
5
9 0 8 3 1 2
5 9 3 9 6 6
- 3 -
- 4 -
- 2 -
- 1 -
Purpose
The motion
detector
is used for automatic, temporary lighting attach
if a person or another object
appears in detector’s range
in places such
as hallways, courtyards, approaches and driveways, garages, etc.
Microwave sensor allows for motion detection by wooden boards,
plasterboard panels, glass and plastics.
Functioning
DRM sensor emits and bounces
high-frequency 5.8
GHz
electromagnetic
waves. The sensor detects changes in the reflected waves caused
by movement of the object in the area of detection. The sensor detects
movement of an object to and from the sensor. Movement in the
range
of detection will automatically attach the lighting
for
time set by the user.
After this time the lights will be turned off automatically. The motion sensor
is equipped with
light dependant relay able to
attaching lighting during
the day.
D
etection
status
and
standby
to attach lights are activated only after
dusk.
S
ensor activation time might be adjust by the user
.
In addition, there is a possibility of
adjustment of
the
detection
area
in range
3-10
m (for h= 2.5 m) and the
receiver actuation
time adjustment
to 8
s
÷
12
min. The inclusion of the receiver is signaled by a shining
green
LED.
Sensor
can work indoors. The sensor allows for motion detection by wooden
boards, plasterboard panels, glass and plastics. Temperature changes do not
affect
on
motion detection
ATTENTION!
The power of microwave radiation is relatively low and is completely safe for
humans and animals. Its value is less than 10
mW. By comparison,
microwaves and cell phones radiate about 1000mW of power (100 times
harder).
Ç
R
?
Ç
Detection range
Radius of the
sensor
detection can be adjusted in the range from
2
m to 10
m
(the parameters for the sensor mounted at a height
of 2.5 m). Rotate the knob to the right [max] increases the area of
a field of detection, rotate left [min] reduces the area of the field
detection.
Actuation time
Receiver’s actuation time
can be adjusted between 8
s for 12
min.
Rotate knob to the right [max] increases
ON
time, rotate left [min]
reduces the attached
time. After a
set
time
receiver is turned off
automatically.
Sensitivity of light dependant relay
Sensitivity of light dependant relay can be adjusted in
range from 2 Lx to 2000 Lx. Rotate the knob toward to the „moon”
sign - attached later, rotation to the „sun” sign - attached earlier.
In
order to
sensor was active throughout the day
, set the
knob
maximally
toward the
„
sun
”
.
Settings
Technical data
supply
230V AC
current load
<5A
frequency of the microwaves radiation
5,8GHz
power radiation
<10mW
detection range
360°
detection ray - adjustable (for h=2,5m)
1÷10m
activation treshold - adjustable
2÷2000Lx
receiver’s activation time - adjustable
8s÷12min.
activation delay
1s
connection
screw terminals 1mm
working temperature
-25÷50°C
dimensions
42mm
power consumption
0,9W
fixed
two screws to the substrate
protection level
IP40
²
Ø103 h=
Assembly
Device assembly
1. Unscrew the outer shield of the detector. Unscrew the two screws and
remove the sensor cover
(Pict
.
1
).
2.
Disconnect the
power.
3. Wires
provide throughout
eyelet
rubber in mounting
base of the sensor
.
4. Basis with two screws attached to the substrate.
5. Connect according to sche
ma
.
6. Set
area of detection,
set
the sensitivity of the
light dependant relay
and
activation
time.
7. Assemble the sensor
’s cover
housing
(Pict
.
2).
(Pict
.
3).
Wiring diagram
L
N
N
L
L'
DRM
Pict. 1
Pict. 3
Pict. 2
D150629
