- 2 -
The relay will be turned off only after pressing the momentary
button again (or after a power failure).
1. Disconnect the power supply.
2. Mount relay in the flush-mounted box.
3. Connect the power supply cables to PWR group: (+)-wire to
terminal 5 or 6 and (–)-wire to terminal 3 or 4.
4. Momentary switches connected in parallel connect to terminal
1 and (+)-wire.
5. Connect the powered receiver in series to terminal 2 and
(–)-wire.
6. Set the switch-off time with the potentiometer.
Mounting
Wiring diagram