background image

- 1 -

AS-B 24

Staircase timer

Staircase timer serves to keep switch-ON lighting of staircase, 

corridor, or any other object for the set time and to switch-OFF 

this lighting automatically, upon elapse of this set time.

Turned ON staircase timer supports the lighting during set time 

by potentiometer (from 0.5 min. to 10 min.). After passage of set 

time timer will switch OFF the lighting automatically. After swi-

tching OFF the lighting there is possibility to switch it ON again.

Purpose

Functioning

F&F Filipowski sp. j.

Konstantynowska 79/81, 95-200 Pabianice, POLAND

phone/fax (+48 42) 215 23 83 / (+48 42) 227 09 71

www.fif.com.pl; e-mail: [email protected]

Do not dispose of this device in the trash along with other waste! 

According to the Law on Waste, electro coming from households free of charge and can 

give any amount to up to that end point of collec� on, as well as to store the occasion of 

the purchase of new equipment (in accordance with the principle of old-for-new, regard-

less of brand). Electro thrown in the trash or abandoned in nature, pose a threat to the 

environment and human health.

Summary of Contents for AS-B 24







Reviews: