F&F 5902431674896, Manual

Page: 4 / 15

- 4 -
Release the button when the expected setting is indicated. Then
set the desired value with short presses of the button.
If the button is not pressed for 5 seconds, the signal li-
ght will flash twice quickly, after which the current set-
ting will be saved and the sensor will exit configuration
mode.
Switch-on time settings
Without pressing
a button
10 seconds
1 press 30 seconds
2 presses 1 minute
3 presses 2 minutes
4 presses 6 minutes
5 presses 10 minutes
6 presses
20 minutes
(last setting – the indicator light will flash twi-
ce quickly, the setting will be saved and the
detector will exit the configuration mode)