Rudder Preparation and Attachment:
Locate the rudder. Apply hinge tape along the entire
length of the rudder hinge.
Attach the rudder to the vertical stabilizer on the fuselage.
Apply tape in the area where the control horn will be on
the “vee” side as well. Lastly, glue two carbon rods from
the stabilizer to the top of the vertical stabilizer. Make
sure this joint is perfectly square or flight performance
may suffer.
Spade Assembly and Attachment:
Locate the spades and spade arms. Assemble the spades
as shown.
Glue the spades on the bottom of the ailerons as shown,
with the spade pointing forward.
Tail Skid Attachment:
5
Summary of Contents for MX2
Page 8: ...Fancy Foam Models 8...
