3
Mounting
Bracket Installation (Optional)
Mounting kit contents:
20" Adjusting Flat X 1
10" Adjusting Flat X1
4" Adjusting Flat X1
Ceiling Angle Mount
Plate Assembly X 1
For your installation, determine if you
will need an adjusting flat and what size
you will use
.
PigTek recommends using
only one adjusting flat per eYeGrow.
E
xample
configurations are
shown
below:
NOTES:
•
Kits can be assembled with or without the adjusting flats,
and
at
any desired
angle
,
from 0 to 90 degrees,
to help you achieve
the optimal
7.55 ft height for the
eYeG
row to hang
.
•
It is recommended to use
at least
two screw
holes
to secure the
20" flat.
to the angle mount.
•
The
ceiling angle mount piece
must be mounted to wood using
3/8" lag bolts only. Any other method of mounting
the eYeGrow
may void eYeGrow warranty at PigTek's discretion.
Mounting Screws
/
Nuts (Not Pictured)
