Aura 70
Installing the Aura 70
16
Use of the terminal resistor depends on the location of the control computer in FNet. Control computers or end
stations at the beginning of the network require a terminal resistor. Depending on the device type a 120 Ohm
resistance, a jumper or a dipswitch is used to terminate the control computer.
Example: Setting the terminal resistor FNet
Four control computers connected using FNet.
Control computers 1 and 4 are at the end of the network. These control computers must be terminated.
Control computers 2 and 3 are looped. These looped control computers do not require a terminal
resistor.
The Fancom Greenlink cable (UTP 1x2x0.8mm, unshielded twisted pair) used to wire the FNET and I/O
net. Maximum cable length = 1200 meters.
Summary of Contents for AURA 70
Page 1: ...g...
