Aura 37
Alarm
13
The Aura 37 displays the alarm overview by pressing
. There are two types of alarm:
1.
Loud alarm
: An active loud alarm sounds a siren, shows an alarm message and a report on the screen. This
type of alarm has a
high priority
.
2.
Silent alarm
: An active silent alarm shows an alarm message and a report on the screen. This type of alarm
has a
low priority
.
Status
Readout / setting the alarm status:
Alarm stand by
: no alarm (stand by mode).
Alarm test
: test the alarm and after reset the status will be changed to
Alarm
stand by
.
Alarm recovered
: there was an alarm which has been recovered. The controller
switches off the alarm, but the alarm status remains visible.
Silent alarm
: alarm message shown on screen only.
Alarm temp. off
: switch off the current alarm. When the alarm situation has been
cancelled, this status will automatically become
Alarm stand by
. Always check
that the status has reverted to
Alarm stand by
.
Alarm disabled
: switch off the alarm entirely. Only do this when houses are
unoccupied. Do not forget to reset the status to
Alarm stand by
.
Alarm
: the type of alarm is shown on the screen.
-
: function not in use.
Message
Readout of the alarms (see table below).