A
B
C
INSTALLATION STEPS
1) Remove screws off the bottom of the motor housing.
Align the blades with screw holes on motor housing, and secure with the screws, washers
and the blade fixing plate.
2) 125 mm and 250 mm downrods are included in the box. Pick one from the box. Keep the
side with 3 holes up.
Feed the main motor wire plug up through the inside of the downrod, then insert the
downrod into the motor bush. Gently push the cross-pin through the holes aligned with the
base of the motor bush and downrod. CAUTION: DO NOT force the cross-pin, gently wiggle
and rotate it until it glides through both holes. Replace the cotter-pin on the other side of
the cross-pin to secure the downrod to the motor bush. Tighten up both cross screws to
make the downrod rigid in the motor bush.
A
B
C
A
B
C
D
E
A
B
C
5
A
B
C
Summary of Contents for Sanctuary DC W-CFFCSAMB-B5NA
Page 1: ...Sanctuary DC DC Installation Manual...
Page 12: ......