STEP 15: Lift the whole motor assembly into the hanger bracket (O) and rotate the downrod and
ball until the ball falls into it groove (P) and prevents the downrod from rotating further
.
STEP 16: Firmly align and connect the quick connector plugs between the bracket and the motor .
STEP 17: Firmly align and connect the quick connector earth plug between the bracket and the ball.
STEP 18: Push the upper canopy (N) up onto the hanger bracket while tucking all wires neatly under
the
canopy (S). Align the two key holes over the preinstalled screws and twist the canopy into locked
position.
STEP 19: Attach the upper canopy locking ring to the two protruding screws by also aligning the two
key holes over the screws and twisting until locked.
STEP 15, 16, 17
STEP 18, 19
7
